Cảm biến IFL 10-30L-10TP
Thông số kỹ thuật cảm biến Schmersal IFL 10-30L-10TP
đại lý schmersal | đại lý IFL 10-30L-10TP
nhà phân phối schmersal | nhà phân phối IFL 10-30L-10TP
- Metal enclosure
- DC 3-wire
- Long design
- Design M30
Ordering data
Product type description |
IFL 10-30L-10TP |
Article number (order number) |
101126987 |
EAN (European Article Number) |
4030661050751 |
eCl@ss number, version 12.0 |
27-27-40-01 |
eCl@ss number, version 11.0 |
27-27-01-01 |
eCl@ss number, version 9.0 |
27-27-01-01 |
ETIM number, version 7.0 |
EC002714 |
ETIM number, version 6.0 |
EC002714 |
Approvals – Standards
Certificates |
CCC |
General data
Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
Housing construction form |
Cylinder, thread |
Installation conditions (mechanical) |
flush |
Housing material |
Brass |
Housing coating material |
nickel-plated |
Active area |
Plastic |
Material of the nuts |
Brass |
Gross weight |
200 g |
General data – Features
Integral system diagnostics, status |
Yes |
Cable sleeve |
Yes |
Number of cable wires |
3 |
Mechanical data
Tightening torque of nuts, maximum |
30 Nm |
Mechanical data – Switching distances according EN IEC 60947-5-3
Nominal switching distance Sn |
10 mm |
Mechanical data – Connection technique
Length of cable |
2 m |
Termination |
Cable |
Wire cross-section |
0.34 mm2 |
Material of the Cable mantle |
PVC |
Mechanical data – Dimensions
ISO thread of the sensor |
M30 |
width across flats |
36 BK |
Length of sensor |
100 mm |
Ambient conditions
Degree of protection |
IP67 |
Ambient temperature |
-25 … +70 °C |
Protection class |
0 |
Electrical data
No-load supply current I0, typical |
3.5 mA |
Rated operating voltage |
10 … 30 VDC |
Operating current |
200 mA |
Switching element |
Normally open contact (NO) |
Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating |
Switching frequency, approx. |
350 Hz |
VOLT_TYPE_RANGE |
DC |
Electrical data – Digital Output
Voltage drop Ud, maximum |
1.2 V |
Current at Voltage drop Ud |
0.2 A |
Design of control elements |
p-type |
Status indication
Note (Integral System Diagnostics, status ) |
yellow LED |
Note
Note (General) |
Instead of nuts, a mounting clamp can be provided. |