Cảm biến IFL 15-300M-10P
Thông số kỹ thuật cảm biến Schmersal IFL 15-300M-10P
đại lý schmersal | đại lý IFL 15-300M-10P
nhà phân phối schmersal | nhà phân phối IFL 15-300M-10P
- Thermoplastic enclosure
- DC 3-wire
- miniature body
- Design M30
Ordering data
| Product type description |
IFL 15-300M-10P |
| Article number (order number) |
101084080 |
| EAN (European Article Number) |
4030661019291 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Active area |
Plastic |
| Material of the nuts |
Plastic |
| Material of the washer |
Perbunan® |
| Gross weight |
118 g |
General data – Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
3 |
Mechanical data
| Tightening torque of nuts, maximum |
4 Nm |
Mechanical data – Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
15 mm |
Mechanical data – Connection technique
| Length of cable |
2 m |
| Termination |
Cable |
| Wire cross-section |
0.34 mm2 |
| Material of the Cable mantle |
PVC |
Mechanical data – Dimensions
| ISO thread of the sensor |
M30 |
| width across flats |
36 BK |
| Length of sensor |
30 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 … +70 °C |
| Protection class |
0 |
Electrical data
| No-load supply current I0, typical |
3.5 mA |
| Rated operating voltage |
10 … 30 VDC |
| Operating current |
200 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating |
| Switching frequency, approx. |
100 Hz |
| VOLT_TYPE_RANGE |
DC |
Electrical data – Digital Output
| Voltage drop Ud, maximum |
1.2 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Instead of nuts, a mounting clamp can be provided. |
Sản phẩm tương tự
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến