Cảm biến IFL 30-384-10/01-M20
Thông số kỹ thuật cảm biến Schmersal IFL 30-384-10/01-M20
đại lý schmersal | đại lý IFL 30-384-10/01-M20
nhà phân phối schmersal | nhà phân phối IFL 30-384-10/01-M20
- 3 Cable entry M 20 x 1.5
- Thermoplastic enclosure
- AC 2-wire
- Double-insulated
- Wiring compartment
- Design 384
Ordering data
| Product type description |
IFL 30-384-10/01-M20 |
| Article number (order number) |
101173580 |
| EAN (European Article Number) |
4030661302751 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
Approvals – Standards
| Certificates |
CCC |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Gross weight |
230 g |
General data – Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
2 |
Mechanical data – Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
30 mm |
Mechanical data – Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, maximum |
2 x 1.5 mm² |
Mechanical data – Dimensions
| Length of sensor |
40 mm |
| Width of sensor |
55 mm |
| Height of sensor |
120 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 … +70 °C |
| Protection class |
II |
Ambient conditions – Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Rated supply frequency, minimum |
45 Hz |
| Rated supply frequency, maximum |
65 Hz |
| Operating current, minimum |
10 mA |
| Rated operating voltage |
15 … 250 VAC |
| Operating current |
500 mA |
| Switching element |
NO contact or NC contact |
| Protection circuit integrated |
inductive interference protection |
| Switching frequency, approx. |
10 Hz |
| VOLT_TYPE_RANGE |
AC |
Electrical data – Digital Output
| Voltage drop Ud, maximum |
4.5 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
Two-wire |
| Current leakage Ir, maximum |
1 mA |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Programmable by repositioning the plug-in jumper at the terminal screws |
Sản phẩm tương tự
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến