Khóa điện từ AZM 161 Z ST2-AS R
Thông số kỹ thuật khóa điện từ Schmersal AZM 161 Z ST2-AS R
đại lý schmersal | đại lý AZM 161 Z ST2-AS R
nhà phân phối schmersal | nhà phân phối AZM 161 Z ST2-AS R
- Solenoid supply AUS AS interface
- Guard locking monitored
- Manual release
- Solenoid interlock
- Thermoplastic enclosure
- High holding force 2000
- 130 mm x 90 mm x 30 mm
- Interlock with protection against incorrect locking.
- Double-insulated
- Long life
- Integrated AS-Interface
Dữ liệu đặt hàng
Mô tả loại sản phẩm |
AZM 161 Z ST2-AS R |
Article number (order number) |
101209111 |
EAN (European Article Number) |
4030661399744 |
eCl@ss number, version 12.0 |
27-27-26-03 |
eCl@ss number, version 11.0 |
27-27-26-03 |
eCl@ss number, version 9.0 |
27-27-26-03 |
ETIM number, version 7.0 |
EC002593 |
ETIM number, version 6.0 |
EC002593 |
Phê duyệt – Tiêu chuẩn
Certificates |
TÜV cULus ASi-SaW |
Dữ liệu chung
Tiêu chuẩn |
EN IEC 62026-2 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 61508 |
Coding level according to EN ISO 14119 |
Low |
Nguyên tắc làm việc |
electromechanical |
Vật liệu thân |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
Reaction time, maximum |
100 ms |
Trọng lượng thô |
480 g |
Dữ liệu chung – Features
Power to unlock |
Yes |
Solenoid interlock monitored |
Yes |
Manual release |
Yes |
Integral system diagnostics, status |
Yes |
Number of actuating directions |
3 |
Safety classification |
Tiêu chuẩn |
EN ISO 13849-1 EN IEC 61508 |
Performance Level, up to |
c |
Category |
1 |
PFH value |
1.14 x 10⁻⁶ /h |
Note (PFH-value) |
up to max. 100,000 switching cycles/year |
Safety Integrity Level (SIL), suitable for applications in |
1 |
Mission time |
20 Year(s) |
Safety classification – Fault exclusion |
Please note: |
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
Performance Level, up to |
d |
Category |
3 |
PFH value |
1.01 x 10⁻⁷ /h |
Note (PFH-value) |
up to max. 100,000 switching cycles/year |
Safety Integrity Level (SIL), suitable for applications in |
2 |
Mission time |
20 Year(s) |
Dữ liệu cơ học
Tuổi thọ cơ học, tối thiểu |
1,000,000 Operations |
Actuating play in direction of actuation |
5.5 mm |
Lực giữ FZh in accordance with EN ISO 14119 |
2,000 N |
Lực giữ Fmax, maximum |
2,600 N |
Lực chốt |
30 N |
Tốc độ khởi động, tối đa |
2 m/s |
Gắn |
Screws |
Loại vít cố định |
3x M6 |
Dữ liệu cơ học – Connection technique
Connector position |
Right |
Kết thúc |
Connector plug M12, 4-pole, (A-coding) |
Dữ liệu cơ học – Dimensions
Chiều dài của cảm biến |
30 mm |
Chiều rộng của cảm biến |
130 mm |
Chiều cao của cảm biến |
90 mm |
Điều kiện môi trường xung quanh
Mức độ bảo vệ |
IP67 |
Nhiệt độ môi trường |
-25 … +60 °C |
Nhiệt độ bảo quản và vận chuyển, tối thiểu |
-25 °C |
Nhiệt độ bảo quản và vận chuyển, tối đa |
+85 °C |
Relative humidity, minimum |
30 % |
Độ ẩm tương đối, tối đa |
95 % |
Lưu ý (Độ ẩm tương đối) |
non-condensing non-icing |
Khả năng chống rung |
10 Hz … 150 Hz, amplitude 0.35 mm |
Khả năng chống sốc |
30 g / 11 ms |
Lớp bảo vệ |
II |
Độ cao lắp đặt cho phép so với mực nước biển, tối đa |
2,000 m |
Điều kiện môi trường xung quanh – Insulation values
Điện áp cách điện định mức Ui |
32 VDC |
Điện áp chịu xung định mức Uimp |
0.8 kV |
Danh mục quá áp |
III |
Mức độ ô nhiễm |
3 |
Dữ liệu điện
Switching frequency |
1,000 /h |
Dữ liệu điện – AS Interface
Điện áp hoạt động định mức |
26.5 … 31.6 VDC (Protection against polarity reversal) |
AS-i Current consumption, maximum |
250 mA |
Dữ liệu điện – AS-Interface specification
AS-i Specification |
Safety-Slave |
AS-i Version |
V 2.1 |
AS-i Profile |
S-7.B.F.E |
AS-i, IO-Code |
0x7 |
AS-i, ID-Code |
0xB |
AS-i, ID-Code1 |
0xF |
AS-i, ID-Code2 |
0xE |
AS-i Input, Channel 1 |
Data bits DI 0 / DI 1 = dynamic code transmission |
AS-i Input, Channel 2 |
Data bits DI 2 / DI 3 = dynamic code transmission |
AS-i Outputs, DO 0 |
Solenoid control |
AS-i Outputs, DO 1 |
No Function |
AS-i Outputs, DO 2 |
No Function |
AS-i Outputs, DO 3 |
No Function |
AS-i Parameter bits, P0 |
Actuator detected |
AS-i Parameter bits, P1 |
Solenoid interlock locked |
AS-i Parameter bits, P2 |
Magnet voltage in tolerance range |
AS-i Parameter bits, P3 |
Error message – locking/unlocking of the solenoid interlock blocked |
Note (AS-i Parameter bits) |
Set the parameter outputs to “1111” (0xF) FID: periphery error |
AS-i Input module address |
0 |
Note (AS-i Input module address) |
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
Status indication
Note (LED switching conditions display) |
(1) LED yellow: Channel 2 / AS-i SaW Bit 2.3 (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected (3) LED yellow: Channel 1 / AS-i SaW Bit 0.1 |
Other data
Note (applications) |
sliding safety guard removable guard hinged safety guard |
Pin assignment
PIN 1 |
AS-i + |
PIN 2 |
Aux – (P) |
PIN 3 |
AS-Interface – |
PIN 4 |
Aux + (P) |
Scope of delivery
Scope of delivery |
Actuator must be ordered separately. |
Note
Note (General) |
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened. |
Note (Manual release) |
For maintenance, installation, etc. For manual release using M5 triangular key, available as accessory |