Mô đun SRB308IT-230VAC

Thông số kỹ thuật module an toàn Schmersal SRB308IT-230VAC

đại lý schmersal | đại lý SRB308IT-230VAC

nhà phân phối schmersal | nhà phân phối SRB308IT-230VAC

Level 1: Reset without edge detection, Optional Automatic reset function, Short-circuit recognition, Level 2: / Opener (NC) Normally open contact (NO)
Multifunctional safety relay module for superior diagnostics and visualisation
Suitable for the signal processing of outputs with contact sensors
Suitable for signal processing of outputs connected to potentials (AOPDs), e.g. safety light grids/curtains
Suitable for the signal processing of outputs with contact sensors
3 safety contacts, STOP 0
2 + 6 Signalling outputs

Dữ liệu đặt hàng

Note (Delivery capacity)	Not available!
Replacement article number	101166107
Mô tả loại sản phẩm	SRB308IT-230VAC
Article number (order number)	101158202
EAN (European Article Number)	4250116201563
eCl@ss number, version 12.0	27-37-18-19
eCl@ss number, version 11.0	27-37-18-19
eCl@ss number, version 9.0	27-37-18-19
ETIM number, version 7.0	EC001449
ETIM number, version 6.0	EC001449

Phê duyệt – Tiêu chuẩn

Certificates	cULus

Dữ liệu chung

Tiêu chuẩn	EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1
Climatic stress	EN 60068-2-78
Vật liệu thân	Glass-fibre reinforced thermoplastic, ventilated
Trọng lượng thô	480 g

Dữ liệu chung – Features

Stop-Category	0
Electronic Fuse	Yes
Wire breakage detection	Yes
Cross-circuit detection	Yes
Removable Terminals	Yes
Start input	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Reset edge detection	Yes
Earth connection detection	Yes
Integral system diagnostics, status	Yes
Number of auxiliary contacts	2
Number of LEDs	5
Số lượng thường đóng (NC)	2
Number of undelayed semi-conductor outputs with signaling function	6
Number of safety contacts	3
Number of signalling outputs	6

Safety classification

Tiêu chuẩn	EN IEC 60947-5-1 EN IEC 61508
Mission time	20 Year(s)
Common Cause Failure (CCF), minimum	65

Safety classification – Relay outputs

Performance Level, stop 0, up to	e
Category, Stop 0	4
Diagnostic Coverage (DC) Level, Stop 0	≥ 99 %
PFH value, Stop 0	2.00 x 10⁻⁸ /h
Safety Integrity Level (SIL), Stop 0, suitable for applications in	3

Dữ liệu cơ học

Tuổi thọ cơ học, tối thiểu	10,000,000 Operations
Gắn	Snaps onto standard DIN rail to EN 60715

Dữ liệu cơ học – Connection technique

Terminal designations	IEC/EN 60947-1
Kết thúc	rigid or flexible Screw terminals M20 x 1.5
Cable section, minimum	0.25 mm²
Cable section, maximum	2.5 mm²
Tightening torque of Clips	0.6 Nm

Dữ liệu cơ học – Dimensions

Width	45 mm
Height	100 mm
Depth	121 mm

Điều kiện môi trường xung quanh

Mức độ bảo vệ of the enclosure	IP40
Mức độ bảo vệ of the mounting space	IP54
Mức độ bảo vệ of clips or terminals	IP20
Nhiệt độ môi trường	-25 … +45 °C
Nhiệt độ bảo quản và vận chuyển, tối thiểu	-40 °C
Nhiệt độ bảo quản và vận chuyển, tối đa	+85 °C
Khả năng chống rung	10 … 55 Hz, Amplitude 0.35 mm
Khả năng chống sốc	30 g / 11 ms

Điều kiện môi trường xung quanh – Insulation values

Điện áp chịu xung định mức U_imp	4 kV
Danh mục quá áp	III
Mức độ ô nhiễm	2

Dữ liệu điện

Frequency range	50 Hz 60 Hz
Điện áp hoạt động	230 VAC -15 % / +10 %
Điện áp hoạt động định mức	230 VAC
Operating current	125 mA
Rated AC voltage for controls, 50 Hz, minimum	215 VAC
Rated control voltage at AC 50 Hz, maximum	253 VAC
Rated AC voltage for controls, 60 Hz, minimum	215 VAC
Rated control voltage at AC 60 Hz, maximum	253 VAC
Loại sử dụng AC-15	230 VAC
Loại sử dụng AC-15	1.5 A
Loại sử dụng DC-13	24 VDC
Loại sử dụng DC-13	1.2 A
Electrical power consumption	3 W
Electrical power consumption	3 VA
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	in new state
Drop-out delay in case of “emergency stop”, maximum	15 ms
Pull-in delay at automatic start, maximum, typically	60 ms
Pull-in delay at RESET, typically	200 ms
Vật liệu tiếp điểm, điện	AgSn0, Ag-Ni, self-cleaning, positive drive

Dữ liệu điện – Digital inputs

Conduction resistance, maximum	40 Ω

Dữ liệu điện – Electromagnetic compatibility (EMC)

EMC rating	EMC-Directive

Status indication

Indicated operating states	Position relay K2 Position relay K1 Internal operating voltage U_i Position relay K3

Other data

Note (applications)	Guard system Pull-wire emergency stop switches Safety light curtain Emergency stop button

Note

Note (General)	Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Wiring example

Note (Wiring diagram)	The wiring diagram is shown with guard doors closed and in de-energised condition. The ISD tables (Intergral System Diagnostics) for analysis of the fault indications and their causes are shown in the appendix. Relay outputs: Suitable for 2 channel control, for increase in capacity or number of contacts by means of contactors or relays with positive-guided contacts. The control recognises cross-short, cable break and earth leakages in the monitoring circuit. Connect potential p-type outputs of safety light grids/curtains to S12/S22. The devices must have the same reference potential. 2 channel control shown for a guard-door monitor with two contacts, of which at least one contact has positive break, with external reset button (R) and feedback circuit (H2). (example without cross-wire monitoring) For 2-channel control with cross-wire monitoring, connect the NC contact to S11/S12 and S31/S32 and bridge S21/S22 For 1-channel control, connect NC contact to S11/S12 and bridge S21/S22 and S31/S32 “Start function / Reset button: The function “trailing edge” is programmed by means of the “AF” switch located underneath the housing cover (switch position = 1). The automatic start is programmed by bridging terminals X3/X5 and by switching the “AF” switch to 0. The time offset between the channels is approx. 100 ms. An endless time offset between the channels 1 and 2 is programmed by bridging the terminals X3/X6.” F1 = Hybrid fuse F2 = Fuse for signalling outputs

Sign up for Newsletter

Sản phẩm tương tự

Đăng nhập