Phụ kiện BNS-Y-02
Thông số kỹ thuật phụ kiện Schmersal BNS-Y-02
đại lý schmersal | đại lý BNS-Y-02
nhà phân phối schmersal | nhà phân phối BNS-Y-02
- enables the interconnection and the connection of BNS safety sensors to a common safety monitoring module
- for BNS 33, BNS 36, BNS 260 (with 2 NC)
Dữ liệu đặt hàng
| Mô tả loại sản phẩm |
BNS-Y-02 |
| Article number (order number) |
101194060 |
| EAN (European Article Number) |
4030661358086 |
| eCl@ss number, version 12.0 |
27-44-01-06 |
| eCl@ss number, version 11.0 |
27-44-01-06 |
| eCl@ss number, version 9.0 |
27-44-01-06 |
| ETIM number, version 7.0 |
EC002925 |
| ETIM number, version 6.0 |
EC002925 |
Dữ liệu chung
| Versions |
Y-adapter |
| Connector (electric) |
2 x Female connector, 4-pole 1 x Male connector, 4-pole |
| Trọng lượng thô |
23 g |
Dữ liệu cơ học
| Tuổi thọ cơ học, tối thiểu |
100 Cycles |
Dữ liệu cơ học – Dimensions
| Length |
10 mm |
| Width |
23.5 mm |
| Height |
31 mm |
| Diameter of the ISO-thread |
M8 |
Điều kiện môi trường xung quanh
| Mức độ bảo vệ |
IP67 |
| Nhiệt độ môi trường |
-25 … +70 °C |
Accessory
| Recommendation (product combination) |
BNS 33 BNS 36 BNS 260 |
Note
| Note (General) |
The adapter BNS-Y-02 is intended for safety sensors BNS with two normally closed contacts. With the BNS-Y-02, a series circuit is set up where the two normally closed contacts per sensor are connected in a two-channel series arrangement. Any conventional 4-pole cable with M8 connector can be used as connecting cable. The sensor chain is extended by connecting further Y-adapters in the direction of the arrow. The last safety sensor is connected to the female connector on the extension as the termination. Only safety sensors with the same contact configuration can be connected in series. The types BNS-Y-11 and BNS-Y-02 are not allowed to be connected together in a mixed configuration. The maximum length of the series wiring is 50 m. |
Sản phẩm tương tự
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến
Cảm biến