Thứ Ba , Tháng Mười Hai 10 2019
Home / Cảm biến / Cảm biến IFL15-30P-10TP

Cảm biến IFL15-30P-10TP

Cảm biến IFL15-30P-10TP

Thông số kỹ thuật Schmersal IFL15-30P-10TP

Ordering details
 đại lý IFL15-30P-10TP | nhà phân phối IFL15-30P-10TP
Product type description IFL 15-30L-10TP-2130
Article number 101127040
EAN Code 4030661050836
eCl@ss 27-27-01-01
Global Properties
Permanent light IFL – M30
Standards IEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection class None
Materials
– Material of the housings Brass
– Material of the cable mantle Thermoflex 155
– Material of the active surface Plastic
– Material of the terminal fixing thermoplastic
Housing coating nickel-plated
Housing construction form cylinder, thread
Weight 240
Mechanical data
Design of electrical connection Cable
Cable length 2
Conductor with strain relief Yes
Conductors 3 x 0,34
mechanical installation conditions not flush
Switch distance Sn 15 mm
Reduction factor 1 met (Y/N) No
Protection circuit inductive interference protection, Protection against polarity reversal
Pressure resistant (Y/N) No
Tightening torque for nuts A/F 36 max. 3000 Ncm
Ambient conditions
Ambient temperature
– Min. environmental temperature −25
– Max. environmental temperature +130
Protection class IP67 to IEC/EN 60529
Electrical data
Design of control element Normally open contact (NO)
Number of wire 3
Voltage type DC, direct current
Supply voltage UB
– Min. supply voltage 10
– Max. supply voltage 30
Switch frequency approx. 60 HZ
Voltage drop Ud approx. 1.2 V (200 mA)
Operating current Ie 200 mA
No-load current I0 approx. 1.8 mA (24 V)
Outputs
Design of control output PNP
LED switching conditions display
LED switching conditions display (Y/N) No
– yellow LED
ATEX
Explosion protection categories for gases None
Explosion protected category for dusts None
Dimensions
Dimensions of the sensor
– Length of sensor 98
– Diameter of sensor M30
notice
Clamp H 30 is included in delivery
Diagram

Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: IFL 15-30L-10TP-2130- 2130 – 2


…-2130-2 version with nuts

…-2130-1 with silicon cable for humid environments

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *