Công tắc hành trình ML441-11Y-2512-6
Thông số kỹ thuật schmersal ML441-11Y-2512-6
Ordering details | |
Product type description | ML 441-11Y – |
Article number | 101170496 |
EAN code | 4030661297781 |
eCl@ss | 27-27-06-01 |
Approval | |
Approval | CCC |
Global Properties | |
Product name | 441 Rollenschwenkhebel L |
Standards | EN 60947-5-1 |
Compliance with the Directives (Y/N) | Yes |
Suitable for safety functions (Y/N) | No |
Standard housing (Y/N) | No |
Materials | |
– Material of the housings | cast iron, galvanized |
– Roller material | Plastic |
– Material of the contacts | Silver |
Housing coating | painted |
Weight | 1655 g |
Slide form | Castor |
Mechanical data | |
Design of electrical connection | Screw connection |
Cable section | |
– Min. Cable section | 1.5 mm² |
– Max. Cable section | 2.5 mm² |
AWG-Number | 13 |
Active principle | mechanical |
Mechanical life | 5.000.000 operations |
notice | All indications about the cable section are including the conductor ferrules. |
Design of actuating element | Roller lever |
Bounce duration | ≤ 5 ms |
Switchover time | ≤ 35 ms |
Contact opening | 2 x 2.5 mm |
Actuating speed with vertical actuating angle to switch axis | |
– Min. Actuating speed | 1 mm/min |
– Max. Actuating speed | 3 m/s |
– Actuating angle from left of switch axis | 30° |
– Actuating angle from right of switch axis | 30° |
Ambient conditions | |
Ambient temperature | |
– Min. environmental temperature | −30 °C |
– Max. environmental temperature | +90 °C |
Protection class | IP65 to IEC/EN 60529 |
Electrical data | |
Design of control element | Normally open contact (NO), Opener (NC) |
– Change-over contact with double break | |
– galvanically separated contact bridges | |
Switching principle | Snap switch element |
Number of shutters | 1 piece |
Number of openers | 1 piece |
Rated impulse withstand voltage Uimp | 4 kV |
Rated insulation voltage Ui | 250 V |
Thermal test current Ithe | 16 A |
Utilisation category | AC-15: 250 V / 4 A |
Max. fuse rating | 16 A gG D-fuse |
Dimensions | |
Dimensions of the sensor | |
– Width of sensor | 106 mm |
– Height of sensor | 192 mm |
– Length of sensor | 63 mm |
Roller wide | 9 mm |
Roller diameter | 36 mm |
Switch travel diagram | |
Notes Switch travel diagram |
đại lý ML441-11Y-2512-6 | nhà phân phối ML441-11Y-2512-6 | schmersal ML441-11Y-2512-6