Cảm biến IFL 20-333-10/01-M20
Thông số kỹ thuật cảm biến Schmersal IFL 20-333-10/01-M20
đại lý schmersal | đại lý IFL 20-333-10/01-M20
nhà phân phối schmersal | nhà phân phối IFL 20-333-10/01-M20
- 1 Cable entry M 20 x 1.5
- Thermoplastic enclosure
- AC 2-wire
- Double-insulated
- Wiring compartment
- Design 333
Ordering data
Product type description |
IFL 20-333-10/01-M20 |
Article number (order number) |
101173574 |
EAN (European Article Number) |
4030661302737 |
eCl@ss number, version 12.0 |
27-27-40-01 |
eCl@ss number, version 11.0 |
27-27-01-01 |
eCl@ss number, version 9.0 |
27-27-01-01 |
ETIM number, version 7.0 |
EC002714 |
ETIM number, version 6.0 |
EC002714 |
Approvals – Standards
Certificates |
CCC |
General data
Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
Housing construction form |
Block |
Installation conditions (mechanical) |
not flush |
Housing material |
Plastic |
Material of the housing cover |
Luran |
Gross weight |
170 g |
General data – Features
Integral system diagnostics, status |
Yes |
Number of cable wires |
2 |
Mechanical data – Switching distances according EN IEC 60947-5-3
Nominal switching distance Sn |
20 mm |
Mechanical data – Connection technique
Termination |
Screw terminals M20 x 1.5 |
Cable section, maximum |
2 x 1.5 mm² |
Mechanical data – Dimensions
Length of sensor |
112 mm |
Width of sensor |
40 mm |
Height of sensor |
40 mm |
Ambient conditions
Degree of protection |
IP65 |
Ambient temperature |
-25 … +70 °C |
Protection class |
II |
Ambient conditions – Insulation values
Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
Rated supply frequency, minimum |
45 Hz |
Rated supply frequency, maximum |
65 Hz |
Operating current, minimum |
10 mA |
Rated operating voltage |
15 … 250 VAC |
Operating current |
500 mA |
Switching element |
NO contact or NC contact |
Protection circuit integrated |
inductive interference protection |
Switching frequency, approx. |
10 Hz |
VOLT_TYPE_RANGE |
AC |
Electrical data – Digital Output
Voltage drop Ud, maximum |
4.5 V |
Current at Voltage drop Ud |
0.2 A |
Design of control elements |
Two-wire |
Current leakage Ir, maximum |
1 mA |
Status indication
Note (Integral System Diagnostics, status ) |
yellow LED |
Note
Note (General) |
Programmable by repositioning the plug-in jumper at the terminal screws By repositioning the switch 5 different actuating directions can be selected. The selected actuating direction can be marked with a sticker. |