Cảm biến IFL 70-385-11P
Thông số kỹ thuật cảm biến Schmersal IFL 70-385-11P
đại lý schmersal | đại lý IFL 70-385-11P
nhà phân phối schmersal | nhà phân phối IFL 70-385-11P
- Design 385
Ordering data
| Product type description |
IFL 70-385-11P |
| Article number (order number) |
101116724 |
| EAN (European Article Number) |
4030661022048 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Gross weight |
416 g |
General data – Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
4 |
Mechanical data – Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
70 mm |
Mechanical data – Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, maximum |
2 x 1.5 mm² |
Mechanical data – Dimensions
| Length of sensor |
40 mm |
| Width of sensor |
80 mm |
| Height of sensor |
135 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 … +70 °C |
| Protection class |
II |
Electrical data
| No-load supply current I0, typical |
5.5 mA |
| Rated operating voltage |
10 … 60 VDC |
| Operating current |
400 mA |
| Switching element |
NO contact and NC contact (antivalent) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal |
| Switching frequency, approx. |
25 Hz |
| VOLT_TYPE_RANGE |
DC |
Electrical data – Digital Output
| Voltage drop Ud, maximum |
1.5 V |
| Current at Voltage drop Ud |
0.4 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Mounting angle HW 385-1 to simplify mounting available |



