Cảm biến từ BN 120L-10Z 2,0M

Not available!

BN 120L-10Z 2,0M

101210877

4030661388465

27-27-01-05

27-27-01-05

EC002544

EC002544

Magnetic drive

Cylinder, thread

Glass-fibre, reinforced thermoplastic

55 g

Yes

Yes

1

lateral

Magnet

10,000,000 Operations

18 m/s

central with threated flange M12 x 1

0.9 Nm

5 mm … 50 mm

BP 10 = 5 mm

2 x BP 10 = 17 mm

BP 15 = 6 mm

2 x BP 15 = 17 mm

2 x BP 15/2 = 17 mm

BP 34 = 15 … 20 mm

BP 20 = 20 mm

BP 31 = 20 mm

BP 11 = 20 mm

BP 12 = 10 … 30 mm

BP 21 = 25 … 50 mm

Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

0.3 mm

2 m

Cable

0.25 mm²

23 AWG

LiYY

10.7 mm

17 BK

102 mm

IP67

-25 … +70 °C

10 … 55 Hz, amplitude 1 mm

30 g / 11 ms

200 VAC

200 VDC

1 A

30 W

30 VA

Normally open contact (NO)

Reed contacts

Actuator must be ordered separately.

BP 10

2x BP 10

BP 15

2x BP 15

2x BP 15/2

BP 34

BP 20

BP 31

BP 11

BP 12

BP 21

BP 10

2 x BP 15/2

2 x BP 15

2 x BP 10

BP 15

BP 34

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.

The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.