Công tắc hành trình TD 441-11Y-2512
Thông số kỹ thuật công tắc hành trình Schmersal TD 441-11Y-2512
đại lý schmersal | đại lý TD 441-11Y-2512
nhà phân phối schmersal | nhà phân phối TD 441-11Y-2512
- Actuator head can be repositioned in steps 4 x 90°
- Metal enclosure
- Continuous adjustment of lever position 360°
- 2 Contacts
- Lever can be transposed by 180°
- In temperature-resistant version, the roller can be mounted in two different positions on the shaft
- 106 mm x 99 mm x 63 mm (basic component)
- Protection class IP65
Ordering data
Product type description |
TD 441-11Y-2512 |
Article number (order number) |
151203457 |
Approvals – Standards
Certificates |
CCC |
General data
Standards |
EN IEC 60947-5-1 |
Working principle |
mechanical |
Slide form |
Castor |
Housing material |
Grey cast iron, galvanised |
Housing coating material |
painted |
Material resistance (acids) |
good to excellent |
Gross weight |
1,845 g |
General data – Features
Number of normally closed (NC) |
1 |
Number of normally open (NO) |
1 |
Safety classification – Safety outputs
B10D Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
Actuating element |
Roller lever |
Roller material |
Brass |
Mechanical life, minimum |
5,000,000 Operations |
Actuating angle, from left of switch axis |
30 ° |
Actuating angle, from right of switch axis |
30 ° |
Contact opening |
2 x 2.5 mm |
Actuating speed, minimum |
1 mm/min |
Actuating speed, maximum |
3 m/s |
Note (Actuating speed) |
Actuating speed with vertical actuating angle to switch axis |
Mechanical data – Connection technique
Termination |
Screw terminals M20 x 1.5 |
Cable section, minimum |
1.5 mm² |
Cable section, maximum |
2.5 mm² |
Note (Cable section) |
All indications including the conductor ferrules. |
Wire cross-section |
13 AWG |
Mechanical data – Dimensions
Length of sensor |
63 mm |
Width of sensor |
106 mm |
Height of sensor |
192 mm |
Width of Castor |
9 mm |
Diameter of Castor |
36 mm |
Ambient conditions
Degree of protection |
IP65 |
Ambient temperature |
-40 … +200 °C |
Ambient conditions – Insulation values
Rated insulation voltage Ui |
250 VAC |
Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
Thermal test current |
16 A |
Utilisation category AC-15 |
250 VAC |
Utilisation category AC-15 |
4 A |
Switching element |
NO contact, NC contact |
Note (Switching element) |
galvanically separated contact bridges |
Switching principle |
Snap action |
Bounce duration, maximum |
5 ms |
Switchover time, maximum |
35 ms |
Material of the contacts, electrical |
Silver |