Khóa điện từ AZM40B-I2-ST-1P2P

Thông số kỹ thuật khóa điện từ Schmersal AZM40B-I2-ST-1P2P

đại lý schmersal | đại lý AZM40B-I2-ST-1P2P

nhà phân phối schmersal | nhà phân phối AZM40B-I2-ST-1P2P

Dữ liệu đặt hàng

Phê duyệt – Tiêu chuẩn

Certificates	TÜV cULus FCC IC

Dữ liệu chung

Tiêu chuẩn	EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-3 EN IEC 61508
Coding	Individual coding, multiple teaching
Coding level according to EN ISO 14119	High
Nguyên tắc làm việc	RFID
Frequency band RFID	125 kHz
Transmitter output RFID, maximum	-6 dB/m
Vật liệu thân	Light alloy die cast and plastic (glass-fibre reinforced thermoplastic, self-extinguishing)
Reaction time, maximum	100 ms
Duration of risk, maximum	200 ms
Reaction time, switching off safety outputs via safety inputs, maximum	1.5 ms
Trọng lượng thô	270 g

Dữ liệu chung – Features

Actuator monitored	Yes
Latching	Yes
Manual release	Yes
Short circuit detection	Yes
Cross-circuit detection	Yes
Series-wiring	Yes
Safety functions	Yes
Integral system diagnostics, status	Yes
Number of safety contacts	2

Safety classification

Tiêu chuẩn	EN ISO 13849-1 EN IEC 61508

Safety classification – Interlocking function

Performance Level, up to	e
Category	4
PFH value	1.10 x 10⁻⁹ /h
PFD value	8.90 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Dữ liệu cơ học

Interlocking principle	bistable
Mechanical life, locking cycles	1,000,000 Operations
Mechanical life, actuator cycles	200,000 Operations
Holding force F_Zh in accordance with EN ISO 14119	2,000 N
Holding force F_max, maximum	2,600 N
Latching force	40 N
Note (Latch force)	+/- 25%
Tốc độ khởi động, tối đa	0.5 m/s
Mounting	mounting holes countersink
Type of the fixing screws	2x M5
Tightening torque of the fixing screws, minimum	4 Nm

Dữ liệu cơ học – Switching distances according EN IEC 60947-5-3

Assured switching distance “ON” S_ao	1 mm
Assured switching distance “OFF” S_ar	8 mm

Dữ liệu cơ học – Connection technique

Chiều dài của cảm biến chain, maximum	30 m
Note (length of the sensor chain)	Cable length and cross-section change the voltage drop dependiing on the output current
Note (series-wiring)	Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Termination	Connector M12, 8-pole, A-coded

Dữ liệu cơ học – Dimensions

Điều kiện môi trường xung quanh

Mức độ bảo vệ	IP67 IP66
Nhiệt độ môi trường	+0 … +55 °C
Storage and transport temperature, minimum	-40 °C
Storage and transport temperature, maximum	+85 °C
Relative humidity, maximum	93 %
Note (Relative humidity)	non-condensing non-icing
Resistance to vibrations	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection class	III
Permissible installation altitude above sea level, maximum	2,000 m

Điều kiện môi trường xung quanh – Insulation values

Điện áp cách điện định mức U_i	32 VDC
Điện áp chịu xung định mức U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Dữ liệu điện

Operating voltage	24 VDC -15 % / +10 % (stabilised PELV power supply)
No-load supply current I₀, typical	100 mA
Current consumption magnet at switching moment, peak	600 mA / 100 ms
Rated operating voltage	24 VDC
Operating current	1,200 mA
Required rated short-circuit current	100 A
External wire and device fuse rating	2 A gG
Time to readiness, maximum	4,000 ms
Switching frequency, maximum	0.25 Hz

Dữ liệu điện – Magnet control

Designation, Magnet control	IN
Switching thresholds	-3 V … 5 V (Low) 15 V … 30 V (High)
Magnet switch-on time	100 %
Test pulse duration, maximum	5 ms
Test pulse interval, minimum	40 ms
Classification ZVEI CB24I, Sink	C0
Classification ZVEI CB24I, Source	C1 C2 C3
Current consumption at 24V, minimum	10 mA
Current consumption at 24V, maximum	15 mA

Dữ liệu điện – Safety digital inputs

Designation, Safety inputs	X1 and X2
Switching thresholds	−3 V … 5 V (Low) 15 V … 30 V (High)
Current consumption at 24 V	5 mA
Test pulse duration, maximum	1 ms
Test pulse interval, minimum	100 ms
Classification ZVEI CB24I, Sink	C1
Classification ZVEI CB24I, Source	C1 C2 C3

Dữ liệu điện – Safety digital outputs

Designation, Safety outputs	Y1 and Y2
Rated operating current (safety outputs)	250 mA
Design of control elements	short-circuit proof, p-type
Voltage drop U_d, maximum	2 V
Leakage current I_r, maximum	0.5 mA
Voltage, Loại sử dụng DC-12	24 VDC
Current, Loại sử dụng DC-12	0.25 A
Voltage, Loại sử dụng DC-13	24 VDC
Current, Loại sử dụng DC-13	0.25 A
Test pulse interval, typical	1000 ms
Test pulse duration, maximum	0.5 ms
Classification ZVEI CB24I, Source	C2
Classification ZVEI CB24I, Sink	C1 C2

Dữ liệu điện – Diagnostic outputs

Designation, Diagnostic outputs	OUT
Design of control elements	short-circuit proof, p-type
Voltage drop U_d, maximum	2 V
Voltage, Loại sử dụng DC-12	24 VDC
Current, Loại sử dụng DC-12	0.05 A
Voltage, Loại sử dụng DC-13	24 VDC
Current, Loại sử dụng DC-13	0.05 A

Status indication

Note (LED switching conditions display)	Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green

Pin assignment

Accessory

Recommendation (actuator)	AZM40-B1