Thứ Ba , Tháng Mười 26 2021

Công tắc an toàn TESZ1110/30

Công tắc an toàn TESZ1110/30

Thông số kỹ thuật Schmersal TESZ1110/30

Ordering details
Product type description Schmersal TESZ1110/30
Article number 101030067
EAN code
eCl@ss 27-27-26-01
Approval
Approval BG
USA/CAN
 đại lý TESZ1110/30
Classification
Standards EN ISO 13849-1
B10d Normally-closed contact (NC) 2.000.000
B10d Normally open contact (NO) 1.000.000
Mission time 20 Years
notice
Global Properties
Product name TESZ
Standards IEC/EN 60947-5-1, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Materials
– Material of the housings Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
– Material of the contacts Silver
– Material of the hinge Aluminium
Housing coating None
Weight 468 g
Mechanical data
 nhà phân phối TESZ1110/30
Design of electrical connection Screw connection
Cable entry M 20 x 1.5 2
Cable section
– Min. Cable section 0,5 mm²
– Max. Cable section 1 mm²
Mechanical life > 1.000.000 operations
Switching frequency max. 120/h
notice All indications about the cable section are including the conductor ferrules.
Positive break angle 10°
Positive break force 1 N
additional hinge (Y/N) Yes
mounting hinge (Y/N) Yes
Ambient conditions
Ambient temperature
– Min. environmental temperature −25 °C
– Max. environmental temperature +65 °C
Protection class IP65
Electrical data
Design of control element Opener (NC)
Switching principle Creep circuit element
Number of auxiliary contacts 0 piece
Number of safety contacts 3 piece
Rated impulse withstand voltage Uimp 2.5 kV
Rated insulation voltage Ui 250 V
Thermal test current Ithe 2.5 A
Utilisation category AC-15: 230 V / 2 A,
DC-13: 24 V / 1 A
Max. fuse rating 2 A gG D-fuse
ATEX
Explosion protection categories for gases None
Explosion protected category for dusts None
Dimensions
Dimensions of the sensor
– Width of sensor 111.5 mm
– Height of sensor 92 mm
– Length of sensor 36 mm
Suitable for mounting to profile systems 30 mm
notice
The additional hinge including mounting accessories is also available separately, part number Z 400
The opening angle has been set to 4° in factory.
Diagram

Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

Switch travel diagram

Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *