Rơ le an toàn AES1185

Rơ le an toàn AES 1185

Thông số kỹ thuật Schmersal AES1185:

Ordering details


Product type description AES 1185
Article number 101131903
EAN code 4030661279435
eCl@ss 27-37-19-01
Approval


Approval  BG
USA/CAN
Classification


Standards EN ISO 13849-1, IEC 61508
PL up d
Control category up 3
PFH value 1.0 x 10-7/h
– notice up to max. 50.000 switching cycles/year and at max. 80% contact load
SIL up 2
Mission time 20 Years
Global Properties


Product name AES 118x
Standards IEC/EN 60204-1, IEC 60947-5-3, EN 954-1, BG-GS-ET-14, BG-GS-ET-20
Compliance with the Directives (Y/N) Yes
Climatic stress IEC 60947-5-3, BG-GS-ET-14
Mounting snaps onto standard DIN rail to EN 60715
Terminal designations IEC/EN 60947-1
Materials
– Material of the housings Plastic, glass-fibre reinforced thermoplastic
– Material of the contacts Ag-Ni,
Weight 135 g
Start conditions Automatic or Start button
Start input (Y/N) No
Feedback circuit (Y/N) Yes
Start-up test (Y/N) No
Reset after disconnection of supply voltage (Y/N) Yes
Automatic reset function (Y/N) Yes
Reset with edge detection (Y/N) No
Pull-in delay
– ON delay with automatic start adjustable 0,1 / 1.0 s
Drop-out delay
– Drop-out delay in case of emergency stop < 50 ms
Mechanical data


Connection type Screw connection
Cable section
– Max. Cable section 2.5 mm²
Pre-wired cable rigid or flexible
Tightening torque for the terminals 0,6 Nm
Detachable terminals (Y/N) No
Mechanical life 50.000.000 operations
Electrical lifetime 100.000 operations for 230 VAC, 6 A (cos φ = 1)
restistance to shock 30 g / 11 ms
Resistance to vibration To EN 60068-2-6 10…55 Hz, Amplitude 0,35 mm, ± 15 %
Ambient conditions


Ambient temperature
– Min. environmental temperature 0°C
– Max. environmental temperature +55 °C
Storage and transport temperature
– Min. Storage and transport temperature −25 °C
– Max. Storage and transport temperature +70 °C
Protection class
– Protection class-Enclosure IP40
– Protection class-Terminals IP20
– Protection class-Clearance IP54
Air clearances and creepage distances To IEC/EN 60664-1
– Rated impulse withstand voltage Uimp 4.8 kV
– Overvoltage category III To VDE 0110
– Degree of pollution 2 To VDE 0110
Electromagnetic compatibility (EMC)


EMC rating conforming to EMC Directive
Electrical data


Rated DC voltage for controls
– Min. rated DC voltage for controls 20.4 V
– Max. rated DC voltage for controls 27.6 V
Rated AC voltage for controls, 50 Hz
– Min. rated AC voltage for controls, 50 Hz
– Max. rated AC voltage for controls, 50 Hz
Rated AC voltage for controls, 60 Hz
– Min. rated AC voltage for controls, 60 Hz
– Max. rated AC voltage for controls, 60 Hz
Contact resistance max. 100 mΩ
Power consumption < 5 W
Type of actuation DC
Switch frequency 5 Hz
Rated insulation voltage Ui 250 V
Rated operating voltage Ue 24 VDC ±15%
Thermal test current Ithe 4 A
Operating current Ie 0,2 A
Electronic protection (Y/N) No
Inputs


Monitored inputs
– Short-circuit recognition (Y/N) Yes
– Wire breakage detection (Y/N) Yes
– Earth connection detection (Y/N) Yes
Number of shutters 3 piece
Number of openers 3 piece
Input resistance approx. 5000 Ω at GND
Input signal “1” 12 … 30 VDC
Input signal “0” 0 … 2 VDC
Cable length 1000 m with 0,75 mm² (for Rated voltage)
Outputs


Stop category 0
Number of safety contacts 1 piece
Number of auxiliary contacts 0 piece
Number of signalling outputs 0 piece
Switching capacity
– Switching capacity of the safety contacts min.>10 mA, max. 4 A
Fuse rating
– Protection of the safety contacts 4 A gG D-fuse
Utilisation category To EN 60947-5-1 AC-15: 250 V / 2 A
DC-13: 24 V / 2 A

đại lý AES1185, nhà phân phối AES1185, đại lý schmersal AES1185, tài liệu AES1185

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

090 423 1199
Zalo: 090 423 1199 Nhắn tin qua Facebook SMS: 090 423 1199